This topic contains 4 replies, has 2 voices, and was last updated by
My Xkey 37 no longer is recognized by the Xkey Plus App on my OSX. It was working at first and I haven’t made any changes to the system. I tried to restart as well. The Xkey 37 is showing the power light when connected via USB.
Hi, if the red led of your Xkey37 is blinking after you connect to your Mac, maybe its USB connector was defective. Please contact our distributor to get local support directly.
You can find their information here: http://www.cme-pro.com/where-to-buy/
I recently purchased the midi din breakout adapter. After testing that adapter with the keyboard, the Xkey WAS blinking red when powered from wall power. However, it does NOT blink red from USB.
Yes. If you do not connect USB with computer but only power adaptor, it will be blinking slowly. It will not stop any feature but only show the USB MIDI was not detected by computer.
Is it safe to operate the Xkey 37 with wall power adapter at the same time as using the Xport cable? Or does it need to be powered by a computer?
You must be logged in to reply to this topic.